Audio Files

Note: Resetting the Paging Relay device back to factory defaults does not reset the audio files back to the defaults.

To reset all audio files back to defaults, click Restore Default Audio Files at the bottom of the screen.

To reset an individual audio file back to the default, click Delete for that file.

The following audio files are used by the Paging Relay device to provide an audio output over an attached speaker of the device's IP address.

• 0-9
• Dot
• Your IP address is
• Rebooting
• Restoring default audio files

Unless you are customizing these files into another language, you shouldn't change them.

The files you may want to change are:

• Sensor Triggered - See Sensor Contact Closure Configuration.
• Night Ring - See Night Ringer Configuration.

Audio files uploaded must meet these specifications:

• File Type = RIFF (little endian) data, WAV audio, or Microsoft PCM
• Parameters = 8 bit resolution, mono, 8000Hz sampling frequency