Fanvil Configuration
You can send text and stored audio notifications to supported Fanvil phones, as well as create Side Keys on the phones to trigger notifications.
Supported Fanvil Phones
Revolution supports the V63 and V65 Fanvil phones.
Register your Fanvil Phones as EndpointsThese registration instructions instruct a Fanvil phone to communicate with Revolution when any of the selected actions occur. Revolution, upon receiving the communication, registers the phone so that you can use it as an endpoint, which will be named similar to:
Fanvil <Phone Model> <MAC Address>
-
Log into the web configuration interface for your phone.
-
Go to Phone Settings > Action.
-
For the listed actions, identify those for which Fanvil should use to register the phone. You must select all of the following actions, if available for your phone (not all actions are available for every phone):
-
IP Changed
-
Setup Completed
-
Registration Succeeded
-
Reset Phone
-
-
For each selected action, enter the following string into the value fields, where you replace [ip_address] with your Revolution IP address.
http://[ip_address]/FanvilListener?mac=$mac&firmware=$firmware&model=$model
-
Reboot the phone; manually or in the configuration interface at System > Reboot Phone.
Configure Your Fanvil Phones to Receive Text
To send notification text to your Fanvil phones, you must configure the Push XML Server feature to accept communications from Revolution.
-
Log into the web configuration interface for your phone.
-
Go to Phone Settings > Features.
-
For Push XML Server IP Address, enter the IP address of your Revolution server. Alternatively, you can leave this field empty, which means that the phone will accept information from any IP address.
Configure Revolution for Fanvil Phones
There are no configuration steps required within Revolution.
Sending Notifications to Fanvil Phones
Follow the instructions for Notifications Basics and the specific notification types Text and Images Notification or Stored Audio Notification.
-
For text notifications, select your Fanvil phones in the Endpoint & Contact Selection section, as set up in Register your Fanvil Phones as Endpoints.
-
For audio notifications, configure multicast on the phone as described in Configure Fanvil SIP Phones and then select the Static Stream you created in Static Stream Notifier
Setting up Fanvil Side Keys
You can configure Fanvil Side Keys to interact with Revolution with phone service triggers
-
Create phone service triggers in Revolution. See Phone service triggers that send a notification
-
Configure your Fanvil phone Side Keys – See Fanvil Phone Services.
